All About Daily Stockton News

Plumbing Supplies Needed

Jun 8

There are several plumbing supplies needed in the home or office. These can be purchased at a hardware or home improvement store. Many of these tools are also used by plumbers and should be kept in a toolbox or drawer at all times. Purchasing extra tools can be especially useful if you work with copper plumbing. This article will cover some of the essential plumbing supplies you will need to have on hand. Let's start with the basics.


You'll need to purchase a propane torch for sweating copper pipes. It's a handy tool for any job and costs around $30 to $60. This kind of torch has a trigger that allows it to ignite itself, which is much easier than using a striker and matches. You'll also need a pair of channel lock pliers to cut open old rusted fixtures. These are available in two sizes and are essential for re-piping.

A cordless drill is another essential tool for plumbers. This type of drill has a long life and rechargeable battery, which makes it easy to use. Look for a drill that has a manufacturer's warranty for the battery. This will ensure the quality of your work. You'll need the right plumbing supplies in order to do a job well. If you're working with a lot of water and need to make repairs, you'll need a lot of tools.

If you're looking for tools to tackle plumbing problems, you'll need a few tools. A plumber's tap is a vital piece of equipment, as it allows them to turn on or off the water. It's important to have a good quality plumber's tap in case you have to replace a pipe, so make sure you buy good-quality tape. In addition to a good quality tap, plumbers may also need to cut holes and resize pipes for repairs. This can be done easily with a hole saw.

Plumbing wrenches can be very useful. There are many different types of wrenches needed in a plumbing job. For example, a plumber will need at least four wrenches. A plumber will need to have at least two sizes of each of these tools. If you are not sure, consult with a plumbing professional. If you can't find an online source, you may need to hire a licensed plumber to do the work for you.

Another type of tool that plumbers will need is a hole saw. A hole saw is a tool that cuts holes in walls. If a hole is too big, a pipe cutter is a good solution. A pipe breaker can help you to keep track of the water pressure in a house. If the leaking faucet is a serious concern, a plumber should consider a plumber to perform the repair for you.

Other tools that plumbers will need include a propane torch and a hammer. These are the tools that plumbers need for sweating copper pipes. A propane torch can cost anywhere from $30 to $60. A self-igniting torch head is more convenient than a striker and matches. A stubby screwdriver will help you tighten small screws, such as faucets. Depending on the size of the pipe, a hammer is also a good tool.

Borescopes are small cameras that plumbers need to inspect pipes and check for leaks. A good one has a long-life battery. A good one will also be rechargeable. If you're a homeowner, it is likely that you'll need to repair leaky faucets on your own. However, professional plumbers can benefit from buying professional-grade plumbing supplies. These tools will give you a competitive edge and help you finish projects in a timely manner.

A propane torch is necessary for sweating copper pipes. A good quality one will last for years and can withstand hot and cold temperatures. If you are working with a rusty fixture, you may need to cut it open. A hole saw will do this job for you. It is a tool that can be used to open a wall. When using the pliers, you'll need to be sure to use the correct size and type for the job.


Bryco Plumbing

22512 Victory Blvd, Woodland Hills, CA 91367

(818) 349-9000


Bryco Plumbing

Plumber Woodland Hills